Product description With its compact size and spirited performance, the1-horsepower Colt variable-speed palm-grip router kit from Bosch is a veryversatile tool. Its not just a laminate trimmer, but is ideal for trimmingdeck planks, hinge mortising, edge forming, slot cutting, dovetailing, windowcutouts and decorative inlays. The PR20EVSNK variable-speed palm-grip routerkit has a palm-grip design with soft grip to make it the most comfortablerouter in its class, yet it also has enough power to do the job and is morecomfortable and easy to use than larger routers. The softstart reduces start-up torque while the Bosch constant response circuitry monitors and maintainsspeed under load for consistent performance and overload protection. Easilymove the motor from base to base with the quick-clamp system to work on otherareas of your project. A convenient Front Spindle Lock on the motor wasdesigned for easy, one-wrench bit changes, and a shaft wrench is also includedfor those who prefer to use two wrenches to change bits. Bosch even coveredthe small details by angling the cord to help keep it out of the way. Thecontents of this kit make it ideal for all router users. The BoschPR20EVSNK Colt Installers Kit with Edge Guide is ideal for professionallaminate installers. This kit supplies all the necessary tools for roundingover deck planks and railings, mortising hinges, cutting slots, dovetailing,and much more. The Colt Installers Kit also offers a range of capabilities fordo-it-yourselfers and woodworks of all levels. This kit comes with thePR20EVSK router, three bases (fixed, tilt, and offset), roller guides,straight edge guide, underscribe assembly, carry case, and wrenches. ThePR20EVSNK Colt Installers Kit with Edge Guide offers: Highest horsepowerrating in its class. Variable speed of 16,000 to 35,000 RPM. Constant-ResponseCircuitry to maintain speed under load. Includes router, three bases, rollerguides, edge guide, underscribe assembly, carry case, and wrenches. Viewlarger. Rubber over-molded grip allows for stable, one-handed operation. Viewlarger. Powerful Motor, Variable Speed, and Depth Adjustment for PreciseResultsThe PR20EVSK palm-grip router owes its robust performance to a1.0-horsepower (the highest rating for small routers), 5.7-amp motor thatspins at a variable speed of 16,000 to 35,000 RPM and has a soft-start thatreduces startup torque. Additionally, depth adjustment is; even micro-fineadjustments take little effort thanks to the wheel on the back of the routersbase. User-Friendly Features for Flexibility, Comfort, and ReliabilityThisuser-friendly tool offers simple, straightforward operation. First, thecollect accepts standard 1/4-inch bits to give you job flexibility, with animpressive maximum diameter of 1-5/16 inch. For added convenience, a frontspindle lock on the motor means easy, one-wrench bit changes, but a shaftwrench is also included for those who prefer to use two wrenches. In addition,the speed dial is conveniently mounted on top of the tool body for easyaccess. An added bonus, the motor housing has a palm-shaped, rubber over-molded grip that allows for stable, one-handed operation. Constant ResponseCircuitry for Stable Motor SpeedThis model includes Boschs "ConstantResponse" circuitry, which monitors and maintains speed under load forconsistent performance and overload protection. Constant Response works bydetecting tough loads and then increasing power to maintain the selected RPM.Working with stable speed lets you concentrate on controlling the router, soyoull always make clean, burn-free cuts. Additionally, a quick-clamp systemallows the motor to be easily adjusted and moved from base to base. Forfurther convenience, an angled cord exit keeps the routers cord safely out ofyour work area. Three Bases Adapt to the Job at HandAll three bases includedin this kit are modeled from high-end castings and no-mar plastic sub-bases,and they use flip-lever, adjustable locking cam levers to secure the motor.Moving the motor from one base to another requires no tools. Additionally, thefixed and tilt bases have an easy-to-use micro-fine adjustment feature; theoffset base bit height is fixed because of the belt drive system. The tiltbase features detents at key angles to allow routing at special angles and inhard-to-reach areas. It also has the same bit-height adjustment as the fixedbase, but it can pivot 45 degrees forward and 30 degrees backward. Accessoriesfor Versatility and PrecisionAn underscribe attachment mounts to the fixedbase, so you can create precise seams between sheets of laminate. Theres alsoa straight edge guide that directs the router along the edges of theworkpiece, or up to 3-5/8 inches from the edge. Finally, a special rollerguide for the offset base attaches to the sub-base plate, so you can usetemplates to cut or trim openings when working in confined areas. This kitcomes with a one-year warranty. Whats in the BoxPalm grip router; drop-forgedwrenches; straight edge guide (PR002); roller guide (PR003); offset base withroller guide (PR004); tilt base (PR005); underscribe plate with wrenches;carrying case; PR20EVS motor; fixed base (PR001); and 1/4-inch self-releasingcollet. See all Product description

Photos: Not all photos are of actual product, read description for full information on product you are looking at. Photos display products may have additional item to show products use.

<>> >> >--& color="#009933">

Thank you for your interest in our products, have a great week! Feedback We take our reputation seriously, we buy and sell online, so we understand the value of trust. If you are unsatisfied with your order, please contact us and we will work with you to resolve it to your satisfaction. Owned by Hot Rides 4 U. <!-- Begin Official PayPal Seal --><!-- End Official PayPal Seal --> Handling

We to process and attempt to ship all orders within 3 business days of payment and then shipping takes approximately 1 to 3 days on most products.

Delivery

We DO NOT SHIP TO P.O. Boxes or Mail Forwarding Addresses. We only ship to Paypal verified addresses.

Return Policy    All returns accepted within 28 days, refund given as money back (no exchanges permitted), return shipping to be paid by buyer. All Returns/Exchanges must be post-marked within 21 days of receiving item. All merchandise purchased from Hot Rides 4 U is sold in its original factory packaging with all contents as supplied to us by the manufacturer/distributor. Therefore, it can be returned or exchanged only if in original manufacturers packaging with a cardboard/postal box or other adequate packaging to ensure your return or exchange is not damaged on the way back to drop shipper. Items must be in same condition as sold, with all literature/instructions/documentation and attached tags, instructions, etc. Worn items, used items and any items without the tags attached will be refused. Never ship an item in its original manufacturers packaging because this will damage the packaging. Please use a cardboard/postal box or other adequate packaging to ensure your return or exchange is not damaged on the way back to the drop shipper or Hot Rides 4 U. In other words, even though your item came in a box, you need to put that box in another box for shipping purposes. We are not responsible for goods we received that are damaged. These damaged goods become the property of the buyer if not shipped properly, and you may be will be charged to send them back to you. All returns/exchanges must include a RMA - Return Merchandise Authorization form. By emailing us on eBay for RMA form. Returns: There is a 15% restock fee on all returns. Defective items are excluded from restock fee. Exchanges: Buyer is responsible for all shipping cost on exchanges. Please email for availability on exchanges because the item may not be available. *Windscreens are not eligible for a return/exchange if any part of the packaging has been opened.

Thank You For Your Business! <!-- Zinc EPID: B000EJX202 --> </body></html>