DAB High Speed 3" Submersible Pump MICRA HS 303-5 1,9KW 1X230V Z1

DAB High Speed 3" Submersible Pump MICRA HS 303-5 1,9KW 1X230VMICRA HS HIGH SPEED 3" SUBMERSIBLE PumpDOMESTIC WATER SUPPLYApplications Electric borehole Pump for 3" wells or larger. These units have a very extensive range of applications for lifting and distribution in domestic and industrial water systems, filling of pressure vessels and tanks, pressure booster and irrigation systems. MICRA HS is composed by a three-phase submersible Pump and driven by a sigle phase inverter (ACTIVE DRIVER). Pump construction features Multi-stage centrifugal type. Directly coupled pump and motor with rigid coupling. Impellers and thrust rings in Noryl and diffusers in self-lubricating polyacetal. Pump liner, shaft with coupling, filter and cable cover in stainless steel. Base support and head in brass with check valve incorporated in head. Motor construction characteristics Submersible asynchronous two-pole motor made entirely of AISI 304 stainless steel with brass supports. Squirrel cage rotor in copper mounted on Kingsbury thrust block. Cooling of the thrust bearing assembly and the bushings is provided by water, thereby eliminating the risk of contamination. Canned stator in an airtightcasing made of AISI 304L stainless steelTHE ACTIVE DRIVER 2.2 is pre-setted for the functioning at 110 Hz frequency Power supply tolerance: 230 V Single phase +10%/ 20% Max. Frequency: 110 Hz (6300 rpm) Max. motor phase current: 10.5 Amp rms Absolute minimum voltage: 184 V Absolute maximum Voltage: 264 V Pump voltage: 230 V three-phase Operating range: from 1 to 5.5 m3/h with head of up to 90 m. Pumped liquid: clean, free of solid or abrasive contaminants, non-viscous, non-aggressive, chemically neutral, close to the properties of water. Liquid temperature range: from 0°C to +35°C Maximum permissible sand quantity: 30g/m3 Installation: in 3" boreholes or larger, tanks and cisterns, vertical position. In the event of horizontal installation ensure a minimum load is applied to the thrust bearing assembly. Motor power cable: 1.4 m Available with a 30 m shielded cable The package contain Submersibe Pump. active driverand power cable
DATA SHEET <!-- Generated by Ready Pro - Begin -->Generated by Ready Pro
The only all-in-one solution to manage your company, your e-commerce and your eBay store<!-- Generated by Ready Pro - End -->