Lowara CO Centrifugal Pump CO500/30/P 3KW 4HP 3x230/400V 50HZ Z1

Lowara 101820170 CO500/30/P 3KW 4HP 3x230/400V 50HzLOWARA CO-COM series Open impeller centrifugal electric pumps and threaded connections
Three-Phase Pump


Lowara CO-COM Series

Open impeller centrifugal electric pumps and threaded connections
All components in contact with pumped liquid are made of AISI 316L stainless steel
Mechanical seal made of Silicon carbide/tungsten carbide/FPM in the “K” version

MARKET SECTORS

Civil,
Industrial.

APPLICATIONS

Washing of metal parts and/or surface treatment.
Washing of produce in the packaging industry.
Food industry washing equipment and systems.
Dyeing plant and textile industry.
Plants for the circulation and transfer of moderately viscous liquids, with light chemical aggressiveness.
Industrial washing machines and commercial dishwashers.

SPECIFICATIONS - PUMP

Delivery up to 900 l/min (54 m3/h).
Head up to 24 m.
Temperature of pumped liquid: -10°C to +110°C for standard version.
Maximum working pressure : 8 bar (PN 8).
Suspended solids handled up to:
CO350: 11 mm.
CO500: 20 mm.

SPECIFICATIONS - MOTOR

Asynchronous, squirrel cage rotor, enclosed construction in aluminium casing, external ventilation.
Protection: IP55.
Class 155 (F) insulation.
Performances according to EN 60034-1.
Maximum ambient temperature: 40°C.
Standard voltage:
- Single-phase version: 220-240 V 50 Hz, 2 poles with built-in automatic reset overload protection up to 1,5 kW. For higher powers the protection must be provided by the user.
- Three-phase version: 220-240/380-415 V 50 Hz, 2 poles; overload protection to be provided by the user.
Condensate drain plugs on all motors.

CONSTRUCTION FEATURES

Close-coupled, single-impeller centrifugal pump with axial suction and radial delivery.
Threaded suction and delivery ports (Rp ISO 7).
Compact construction; adaptor for motor/pump coupling; the impeller is keyed directly to the motor shaft extension.
Back pull-out design; no need to disconnect the pump body from the system pipes.
AISI 316L stainless steel open impeller with four pressed vanes welded onto base disk.
Impeller’s front wear surface consists of a study AISI 316L stainless steel plate welded onto the suction port.
AISI 316L stainless steel pump body and seal housing disk, with no diffusers or cavities for easier cleaning and maintenance.
Pump body tightened by 8 screws allowing rotation of the discharge head.
Mechanical seal:
Standard version: Carbon/Ceramica faces, FPM elastomers. The other parts are made of AISI 316L stainless steel.
“K” version : faces are made of Silicon Carbide and Tungsten Carbide. FPM Elastomers. The other parts are made of AISI 316L stainless steel.
FPM O-Rings.

OPTIONAL FEATURES

Different voltages and frequencies.
Different materials for the mechanical seal and O-rings.

DATA SHEET <!-- Generated by Ready Pro - Begin -->Generated by Ready Pro
The only all-in-one solution to manage your company, your e-commerce and your eBay store<!-- Generated by Ready Pro - End -->