Lowara SCUBA Submersible Pump 5" SC205C L27 0,55 kW / 0,75 HP / 1x220-240V Z1

Lowara SCUBA 107660010 SC205C L27 0,55 kW / 0,75 HP 1x220-240V 50HzLOWARA SCUBA Close-coupled Submersible Electric Pumps for clean water in 5” wells
Single-phase pump WITHOUT float switch


LOWARA SCUBA Series

Close-coupled Submersible Electric Pumps

??Innovative
??Compact
??With Double seal system
??Easy to install

MARKET SECTORS
CIVIL, AGRICULTURAL, INDUSTRIAL.

APPLICATIONS
??Water supply from primary water supply tanks or reservoirs, 6” wells, basins and watercourses.
??Sprinkler irrigation systems.
??Pressure boosting with pump directly inserted in tank or well, to avoid suction problems and noise.

SPECIFICATIONS PUMP
??Delivery: up to 7,5 m3/h at 2850 rpm.
??Head: up to 80 m at 2850 rpm.
??Maximum overall diameter of electric pump: 128 mm.
??Maximum immersion depth: 20 m.
??Maximum permissible quantity of suspended sand: 25 g/m3.
??Passes solids up to 2,5 mm.
??Delivery port: Rp 1 1/4.
??Motor power : 0,55 to 1,1 kW.
MOTOR
??Single-phase version: 220-240 V, 50 Hz 2 poles (2850 rpm).
??With built-in automatic reset overload protection.
??With built-in capacitor.
??Three-phase version: 380-415 V, 50 Hz 2 poles (2850 rpm);overload protection to be provided by user and installed in the control panel (see electric panel section).
??Maximum supply voltage variations: ±5%.
??Classe F insulation.
??Can also operate in horizontal position.
??Maximum number of starts perhour, evenly distributed:25 for motors up to 0,9 kW.20 for motors 1,1 kW.
??Maximum temperature of water in contact with the motor: 40°C (continuos use).
MANUFACTURING
FEATURES
Single-phase range with pre-assembled float switch (SCUBA G series).
Kit including pump + Hydrovar®
Watercooled inverter available for the following models:
HVW/SC207T and HVW/SC407T.On request, different voltages and frequencies.
??AISI 304 stainless steel impellers available on request.
CONTRUCTION CHARACTERISTICS
??Close-coupled, multiple impeller submersible electric pump.
The liquid end is located underneath the electric motor, which is cooled by the pumped liquid.
??Impellers are radial centrifugal type, made of technopolymer.
??AISI 304 stainless steel diffusers.
??Outer sleeve, motor casing, suction screen and shaft extension are made of AISI 304 stainless steel.
??Dry motor.
The electric motor is protected by a double seal system with an oil chamber.
The silicon carbide mechanical seal,highly resistant to abrasion and wear, together with the second mechanical seal, lubricated thanks to the special
configuration of the oil chambers, guarantee long-lasting reliability.The oil used is according to standard for oils in contact with foodstuffs
(F.D.A. - FOOD AND DRUG ADMINISTRATION)

DATA SHEET <!-- Generated by Ready Pro - Begin -->Generated by Ready Pro
The only all-in-one solution to manage your company, your e-commerce and your eBay store<!-- Generated by Ready Pro - End -->