NACHI IPH Series Double IP Pump IPH-24B-3.5-32-11 MODELS

Need a CAD or 3D Model?

Зв'язатися з нами зараз WhatsApp Be Our Agent

NACHI USA IPH-24B-3.5-32-11 IPH Series Double IP Pump

Name: NACHI USA IPH-24B-3.5-32-11 IPH Series Double IP Pump
Brand: NACHI
SKU: IPH Series Double IP Pump IPH-24B-3.5-32-11
Rating: 4.9 (5 reviews)

NACHI IPH Series Double IP Pump IPH-24B-3.5-32-11 Bearing SPECIFICATIONS

Бренд:NACHI
Номер моделі:
IPH Series Double IP Pump IPH-24B-3.5-32-11

kamenzhangChina

kamenzhang2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!

Interested In: Price Inspection Certificate Product Specifications Company Profile

NACHI IPH Series Double IP Pump IPH-24B-3.5-32-11 Опис продукту

All the types in this new design (11D) series are installation compatible with the previous design (10D). Note, however, that there is no longer compatibility for some of the seal components between the IPH-3 and IPH-4 sizes and the 3 and 4 sizes.1) Configured with the high-pressure, low-noise IPH Series and IP pumps, these double pumps greatly expand the range of application for the IP pump.2)A wide selection of pump combinations provides options that are perfect for just about any type of application imaginable.

Note) 1.Maximum Pressure: Maximum pressure limit when there are frequent pressure changes. However, maximum pressure is the same as rated pressure when load is applied to the headside and shaft side simultaneously.2.Suction Pressure: +0.02 to +0.3 MPa {−0.2 to +0.3 kgf/cm2}3.Avoid installation with the suction port towards the bottom of the pump. If the revolution speed will exceed 1800mm-1, provide separate piping for shaft side and head size IN ports.4.Specify using the model number format shown below when pipe flange is required.5.Working pressure is continuous operating pressure when the same pressure exists on the head side and shaft side.6.Individual pump perform performance on the head side and shaft side is the same as that of the single pumps. Required power is the sum of the power required by each of the twopumps.7.The "Required Power at 1200min-1, 21MPa (kW)" column in the above table are based on combinations that provide the maximum capacity for each model number, when pressure atboth the head side and shaft side is 21MPa. Examples of combinations that provide "the maximum capacity for each model number" are IPH-22B-8-8-11 for IPH-22b, and IPH-46B-32-125-11 for IPH-46B. A capacity of 125 for all *6B Type 6 pumps is used for calculations. The common pump stock list we have:
Gear pump NACHI IPH-24B-3.5-32-11 IPH Series Double IP Pump
Gear pump
The gear pump is a rotary pump that relies on the change in the working volume between the pump cylinder and the meshing gear and the movement to deliver the liquid or to pressurize it. The two gears, the pump body and the front and rear cover to form two enclosed spaces.
When the gear rotates, the volume of the space on the gear off side becomes small and forms a vacuum to suck the liquid, and the volume of the space on the gear meshing side changes from large to large Small, and the liquid into the pipe to go. The suction chamber and the discharge chamber are separated by the meshing lines of the two gears. The pressure at the exit of the gear pump depends entirely on the resistance at the pump outlet.
For more than 50 years Eaton has manufactured external gear pumps that provide the perfect balance of power and cost efficiencies. That’s why Eaton is the first choice for gear pump applications in construction, agriculture, material handling, aerial lift, turf care, utility, forestry, mining,
earthmoving, molding, primary metal, automotive manufacturing, entertainment, machine tools and mobile fan drive systems.
Available in a wide range of standard configurations, multi-pump combinations and custom designs for unique applications, Eaton external gear pumps offer higher pressure, quieter operation, longer life and a full range of optional features for industrial machinery all over the world.
Eaton S26 and L2 aluminum gear pumps come in compact, pre-engineered packages that are a perfect fit for a variety of industrial and agricultural

NACHI IPH Series Double IP Pump IPH-24B-3.5-32-11 INTERCHANGE

gear pumps Part series IPH Series Double IP Pump IPH-24B-3.5-32-11 is a potential replacement for these common bearing part numbers:

NSKIPH Series Double IP Pump IPH-24B-3.5-32-11
SKFIPH Series Double IP Pump IPH-24B-3.5-32-11
NTNIPH Series Double IP Pump IPH-24B-3.5-32-11
FAGIPH Series Double IP Pump IPH-24B-3.5-32-11
TIMKENIPH Series Double IP Pump IPH-24B-3.5-32-11
KOYOIPH Series Double IP Pump IPH-24B-3.5-32-11
NACHIIPH Series Double IP Pump IPH-24B-3.5-32-11
DODGEIPH Series Double IP Pump IPH-24B-3.5-32-11

: Email[email protected]; Адреса; Бізнес телефон(Робочий час); Факс

Відправити зараз

NACHI IPH Series Double IP Pump IPH-24B-3.5-32-11 Technical Articles

IPH-22B-3.5-3.5-11	IPH-34B-13-25-LT-11
IPH-22B-3.5-3.5-L-11	IPH-34B-13-32-11
IPH-22B-3.5-5-11	IPH-34B-16-20-11
IPH-22B-3.5-6.5-11	IPH-34B-16-25-11
IPH-22B-3.5-8-11	IPH-34B-16-32-11
IPH-22B-5-5-11	IPH-35B-10-40-11
IPH-22B-5-6.5-11	IPH-35B-10-50-11
IPH-22B-5-8-11	IPH-35B-10-64-11
IPH-22B-5-8-L-11	IPH-35B-13-40-11
IPH-22B-6.5-6.5-11	IPH-35B-13-50-11
IPH-22B-6.5-8-11	IPH-35B-13-50-L-11
IPH-22B-8-8-11	IPH-35B-13-64-11
IPH-23B-3.5-10-11	IPH-35B-13-64-LT-11
IPH-23B-3.5-13-11	IPH-35B-16-40-11
IPH-23B-3.5-16-11	IPH-35B-16-50-11
IPH-23B-5-10-11	IPH-35B-16-50-LT-11
IPH-23B-5-13-11	IPH-35B-16-64-11
IPH-23B-5-16-11	IPH-36B-10-100-11
IPH-23B-6.5-10-11	IPH-36B-10-125-11
IPH-23B-6.5-13-11	IPH-36B-10-80-11
IPH-23B-6.5-16-11	IPH-36B-13-100-11
IPH-23B-8-10-11	IPH-36B-13-125-11
IPH-23B-8-13-11	IPH-36B-13-80-11
IPH-23B-8-13-LT-11	IPH-36B-16-100-11
IPH-23B-8-16-11	IPH-36B-16-125-11
IPH-24B-3.5-20-11	IPH-36B-16-80-11
IPH-24B-3.5-25-11	IPH-44B-20-20-11
IPH-24B-3.5-32-11	IPH-44B-20-25-11
IPH-24B-5-20-11	IPH-44B-20-25-LT-11
IPH-24B-5-25-11	IPH-44B-20-32-11
IPH-24B-5-25-LT-11	IPH-44B-25-25-11
IPH-24B-5-32-11	IPH-44B-25-32-11
IPH-24B-5-32-L-11	IPH-44B-32-32-11
IPH-24B-6.5-20-11	IPH-45B-20-40-11
IPH-24B-6.5-25-11	IPH-45B-20-50-11
IPH-24B-6.5-25-L-11	IPH-45B-20-64-11
IPH-24B-6.5-32-11	IPH-45B-20-64-L-11
IPH-24B-8-20-11	IPH-45B-25-40-11
IPH-24B-8-25-11	IPH-45B-25-50-11
IPH-24B-8-32-11	IPH-45B-25-64-11
IPH-25B-3.5-40-11	IPH-45B-32-40-11
IPH-25B-3.5-50-11	IPH-45B-32-50-11
IPH-25B-3.5-64-11	IPH-45B-32-64-11
IPH-25B-5-40-11	IPH-46B-20-100-11
IPH-25B-5-50-11	IPH-46B-20-125-11
IPH-25B-5-64-11	IPH-46B-20-80-11
IPH-25B-6.5-40-11	IPH-46B-25-100-11
IPH-25B-6.5-50-11	IPH-46B-25-100-LT-11
IPH-25B-6.5-64-11	IPH-46B-25-125-11
IPH-25B-8-40-11	IPH-46B-25-80-11
IPH-25B-8-50-11	IPH-46B-32-100-11
IPH-25B-8-64-11	IPH-46B-32-125-11
IPH-25B-8-80-LT-11	IPH-46B-32-132-LT-11
IPH-26B-3.5-100-11	IPH-46B-32-80-11
IPH-26B-3.5-125-11	IPH-55B-40-40-11
IPH-26B-3.5-80-11	IPH-55B-40-50-11
IPH-26B-3.5-80-L-11	IPH-55B-40-64-11
IPH-26B-5-100-11	IPH-55B-50-50-11
IPH-26B-5-125-11	IPH-55B-50-64-11
IPH-26B-5-80-11	IPH-55B-50-64-LT-11
IPH-26B-6.5-100-11	IPH-55B-64-64-11
IPH-26B-6.5-125-11	IPH-56B-40-100-11
IPH-26B-6.5-80-11	IPH-56B-40-125-11
IPH-26B-8-100-11	IPH-56B-40-125-LT-11
IPH-26B-8-125-11	IPH-56B-40-80-11
IPH-26B-8-125-LT-11	IPH-56B-50-100-11
IPH-26B-8-80-11	IPH-56B-50-100-LT-11
IPH-33B-10-10-11	IPH-56B-50-125-11
IPH-33B-10-13-11	IPH-56B-50-80-11
IPH-33B-10-16-11	IPH-56B-64-100-11
IPH-33B-13-13-11	IPH-56B-64-125-11
IPH-33B-13-16-11	IPH-56B-64-80-11
IPH-33B-16-16-11	IPH-66B-100-100-11
IPH-34B-10-20-11	IPH-66B-100-125-11
IPH-34B-10-25-11	IPH-66B-125-125-11
IPH-34B-10-32-11	IPH-66B-80-100-11
IPH-34B-13-20-11	IPH-66B-80-125-11
IPH-34B-13-25-11	IPH-66B-80-80-11

Аналіз поточного обслуговування та усунення несправностей відцентрових насосів

1 Основний робочий принцип відцентрового насоса Відцентровий насос розроблений відповідно до принципу відцентрової сили, приводний вал обертання двигуна робочого колесо приводиться в дію відцентрової сили, відцентрова сила, шлях потоку рідини уздовж...

Аналіз витік ущільнення поршня відмови скелета причин високого тиску і лікувальних заходи

поршень мастильних масла мастила виплеску, з'єднувальний стрижень кріпиться до корпусу за межами суглоба в ущільненні колінчастого вала і крейцкопфа скелета масла , щоб запобігти витоку масла. Скелет сальник тіла, що підсилює каркас, щільно спіральна...

Беручи температуру стандартів для електродвигунів і насосів

Перший, підшипник температура стандарт насос підшипник температура стандартного 1, gb3215-824.4.1 насос працює період, максимально несучих температура не перевищує 80 ℃. 2, підвищення температури підшипник jb/t5294-913.2.9.2 не може перевищувати...