BST-10-2B3A-A200-47 Solenoid Controlled Relief Valves

Yuken BST / BSG-03 / 06 / 10 Solenoid Controlled Relief Valves Solenoid Controlled Relief ValvesBST / BSG-03 / 06 / 10Threaded Connections / Sub-plate Mounting Max. Flow L/min: 40Max. Operating Pressure MPa: 25 InstructionsIf a remote control relief valve is used in the vent circuit, see page 3. In addition, if the internal volume of the ventline is too large, chattering is likely to occur. Thus, as far as possible reduce the inside Dia. and the length of the pipe.Pressure is limited by collars fitted. If a working pressure cannot be attained, remove some collars. One collar isequivalent to 10 MPa (1450 PSI).With a small flow, the setting pressure may be unstable. Use models numbered 03 and 06 with a flow rate above8 L/min (2.1 U.S. GPM) and model 10 with 15 L/min (4.0 U.S. GPM).There are two threaded connection pressure ports. They can be connected each other in-line; one as inlet and theother as an outlet or the valve can be used by plugging one of the pressure ports. Yuken BST / BSG-03 / 06 / 10 Solenoid Controlled Relief Valves Model Ordering Code: Yuken BST / BSG-03 / 06 / 10 Solenoid Controlled Relief Valves Model List:
RELIEF VALVESBST-10-2B3A-A200-47 Solenoid Controlled Relief Valves
Parker pressure relief valves are designed such that when upstream pressure exceeds the closing force exerted by the spring, the lower stem opens, permitting flow through the valve.
Constant pressure overflow function: In the quantitative pump throttling system, the quantitative pump provides a constant flow. When the system pressure increases, the flow demand will be reduced. At this point the relief valve open, so that excess flow back to the tank, to ensure that the relief valve inlet pressure, the pump outlet pressure is constant (the valve port often with pressure fluctuations open).
Regulating effect: the relief valve in series on the return line, the relief valve to produce back pressure, moving parts increased stability.
System unloading effect: In the remote control port of the relief valve series of small flow of the solenoid valve, when the electromagnet power, the relief valve remote control port fuel tank, hydraulic pump unloading. The relief valve is used as an unloading valve at this time.
Safety protection: When the system is working properly, the valve closes. Only when the load exceeds the specified limit (the system pressure exceeds the set pressure) to open the overflow, overload protection, the system pressure is no longer increased (usually the relief valve set the pressure than the system maximum working pressure 10% to 20% ).
Practical applications are generally: for unloading valve, for remote pressure regulator, for high and low pressure multi-stage control valve, for the sequence of valves, used to produce back pressure (string in the oil on the road).
Relief valve generally has two kinds of structure: 1, direct-acting relief valve. 2, the pilot relief valve.
The main requirements of the relief valve: large voltage range, voltage deviation is small, the pressure vibration small, sensitive action, overload capacity, noise.

BST-10-2B3A-A100-47	BSG-03-2B3A-D12-47
BST-10-2B3A-A100-N-47	BSG-03-2B3A-D12-N-47
BST-10-2B3A-A120-47	BSG-03-2B3A-D24-47
BST-10-2B3A-A120-N-47	BSG-03-2B3A-D24-N-47
BST-10-2B3A-A200-47	BSG-03-2B3A-D48-47
BST-10-2B3A-A200-N-47	BSG-03-2B3A-D48-N-47
BST-10-2B3A-A240-47	BSG-03-2B3A-R100-N-47
BST-10-2B3A-A240-N-47	BSG-03-2B3A-R200-N-47
BST-10-2B3A-D12-47	BSG-03-V-2B3B-A100-47
BST-10-2B3A-D12-N-47	BSG-03-V-2B3B-A100-N-47
BST-10-2B3A-D24-47	BSG-03-V-2B3B-A120-47
BST-10-2B3A-D24-N-47	BSG-03-V-2B3B-A120-N-47
BST-10-2B3A-D48-47	BSG-03-V-2B3B-A200-47
BST-10-2B3A-D48-N-47	BSG-03-V-2B3B-A200-N-47
BST-10-2B3A-R100-N-47	BSG-03-V-2B3B-A240-47
BST-10-2B3A-R200-N-47	BSG-03-V-2B3B-A240-N-47
BST-10-V-2B3B-A100-47	BSG-03-V-2B3B-D12-47
BST-10-V-2B3B-A100-N-47	BSG-03-V-2B3B-D12-N-47
BST-10-V-2B3B-A120-47	BSG-03-V-2B3B-D24-47
BST-10-V-2B3B-A120-N-47	BSG-03-V-2B3B-D24-N-47
BST-10-V-2B3B-A200-47	BSG-03-V-2B3B-D48-47
BST-10-V-2B3B-A200-N-47	BSG-03-V-2B3B-D48-N-47
BST-10-V-2B3B-A240-47	BSG-03-V-2B3B-R100-N-47
BST-10-V-2B3B-A240-N-47	BSG-03-V-2B3B-R200-N-47
BST-10-V-2B3B-D12-47	BSG-03-2B3B-A100-47
BST-10-V-2B3B-D12-N-47	BSG-03-2B3B-A100-N-47
BST-10-V-2B3B-D24-47	BSG-03-2B3B-A120-47
BST-10-V-2B3B-D24-N-47	BSG-03-2B3B-A120-N-47
BST-10-V-2B3B-D48-47	BSG-03-2B3B-A200-47
BST-10-V-2B3B-D48-N-47	BSG-03-2B3B-A200-N-47
BST-10-V-2B3B-R100-N-47	BSG-03-2B3B-A240-47
BST-10-V-2B3B-R200-N-47	BSG-03-2B3B-A240-N-47
BST-10-2B3B-A100-47	BSG-03-2B3B-D12-47
BST-10-2B3B-A100-N-47	BSG-03-2B3B-D12-N-47
BST-10-2B3B-A120-47	BSG-03-2B3B-D24-47
BST-10-2B3B-A120-N-47	BSG-03-2B3B-D24-N-47
BST-10-2B3B-A200-47	BSG-03-2B3B-D48-47
BST-10-2B3B-A200-N-47	BSG-03-2B3B-D48-N-47
BST-10-2B3B-A240-47	BSG-03-2B3B-R100-N-47
BST-10-2B3B-A240-N-47	BSG-03-2B3B-R200-N-47
BST-10-2B3B-D12-47	BSG-03-V-2B2B-A100-47
BST-10-2B3B-D12-N-47	BSG-03-V-2B2B-A100-N-47
BST-10-2B3B-D24-47	BSG-03-V-2B2B-A120-47
BST-10-2B3B-D24-N-47	BSG-03-V-2B2B-A120-N-47
BST-10-2B3B-D48-47	BSG-03-V-2B2B-A200-47
BST-10-2B3B-D48-N-47	BSG-03-V-2B2B-A200-N-47
BST-10-2B3B-R100-N-47	BSG-03-V-2B2B-A240-47
BST-10-2B3B-R200-N-47	BSG-03-V-2B2B-A240-N-47
BST-10-V-2B2B-A100-47	BSG-03-V-2B2B-D12-47
BST-10-V-2B2B-A100-N-47	BSG-03-V-2B2B-D12-N-47
BST-10-V-2B2B-A120-47	BSG-03-V-2B2B-D24-47
BST-10-V-2B2B-A120-N-47	BSG-03-V-2B2B-D24-N-47
BST-10-V-2B2B-A200-47	BSG-03-V-2B2B-D48-47
BST-10-V-2B2B-A200-N-47	BSG-03-V-2B2B-D48-N-47
BST-10-V-2B2B-A240-47	BSG-03-V-2B2B-R100-N-47
BST-10-V-2B2B-A240-N-47	BSG-03-V-2B2B-R200-N-47
BST-10-V-2B2B-D12-47	BSG-03-2B2B-A100-47
BST-10-V-2B2B-D12-N-47	BSG-03-2B2B-A100-N-47
BST-10-V-2B2B-D24-47	BSG-03-2B2B-A120-47
BST-10-V-2B2B-D24-N-47	BSG-03-2B2B-A120-N-47
BST-10-V-2B2B-D48-47	BSG-03-2B2B-A200-47
BST-10-V-2B2B-D48-N-47	BSG-03-2B2B-A200-N-47
BST-10-V-2B2B-R100-N-47	BSG-03-2B2B-A240-47
BST-10-V-2B2B-R200-N-47	BSG-03-2B2B-A240-N-47
BST-10-2B2B-A100-47	BSG-03-2B2B-D12-47
BST-10-2B2B-A100-N-47	BSG-03-2B2B-D12-N-47
BST-10-2B2B-A120-47	BSG-03-2B2B-D24-47
BST-10-2B2B-A120-N-47	BSG-03-2B2B-D24-N-47
BST-10-2B2B-A200-47	BSG-03-2B2B-D48-47
BST-10-2B2B-A200-N-47	BSG-03-2B2B-D48-N-47
BST-10-2B2B-A240-47	BSG-03-2B2B-R100-N-47
BST-10-2B2B-A240-N-47	BSG-03-2B2B-R200-N-47
BST-10-2B2B-D12-47	BSG-03-V-2B2-A100-47
BST-10-2B2B-D12-N-47	BSG-03-V-2B2-A100-N-47
BST-10-2B2B-D24-47	BSG-03-V-2B2-A120-47
BST-10-2B2B-D24-N-47	BSG-03-V-2B2-A120-N-47
BST-10-2B2B-D48-47	BSG-03-V-2B2-A200-47
BST-10-2B2B-D48-N-47	BSG-03-V-2B2-A200-N-47
BST-10-2B2B-R100-N-47	BSG-03-V-2B2-A240-47
BST-10-2B2B-R200-N-47	BSG-03-V-2B2-A240-N-47
BST-10-V-2B2-A100-47	BSG-03-V-2B2-D12-47
BST-10-V-2B2-A100-N-47	BSG-03-V-2B2-D12-N-47
BST-10-V-2B2-A120-47	BSG-03-V-2B2-D24-47
BST-10-V-2B2-A120-N-47	BSG-03-V-2B2-D24-N-47
BST-10-V-2B2-A200-47	BSG-03-V-2B2-D48-47
BST-10-V-2B2-A200-N-47	BSG-03-V-2B2-D48-N-47
BST-10-V-2B2-A240-47	BSG-03-V-2B2-R100-N-47
BST-10-V-2B2-A240-N-47	BSG-03-V-2B2-R200-N-47
BST-10-V-2B2-D12-47	BSG-03-2B2-A100-47
BST-10-V-2B2-D12-N-47	BSG-03-2B2-A100-N-47
BST-10-V-2B2-D24-47	BSG-03-2B2-A120-47
BST-10-V-2B2-D24-N-47	BSG-03-2B2-A120-N-47
BST-10-V-2B2-D48-47	BSG-03-2B2-A200-47
BST-10-V-2B2-D48-N-47	BSG-03-2B2-A200-N-47
BST-10-V-2B2-R100-N-47	BSG-03-2B2-A240-47
BST-10-V-2B2-R200-N-47	BSG-03-2B2-A240-N-47
BST-10-2B2-A100-47	BSG-03-2B2-D12-47
BST-10-2B2-A100-N-47	BSG-03-2B2-D12-N-47
BST-10-2B2-A120-47	BSG-03-2B2-D24-47
BST-10-2B2-A120-N-47	BSG-03-2B2-D24-N-47
BST

Аналіз поточного обслуговування та усунення несправностей відцентрових насосів 1 Основний робочий принцип відцентрового насоса Відцентровий насос розроблений відповідно до принципу відцентрової сили, приводний вал обертання двигуна робочого колесо приводиться в дію відцентрової сили, відцентрова сила, шлях потоку рідини уздовж...

Аналіз витік ущільнення поршня відмови скелета причин високого тиску і лікувальних заходи  поршень мастильних масла мастила виплеску, з'єднувальний стрижень кріпиться до корпусу за межами суглоба в ущільненні колінчастого вала і крейцкопфа скелета масла , щоб запобігти витоку масла. Скелет сальник тіла, що підсилює каркас, щільно спіральна...

Беручи температуру стандартів для електродвигунів і насосів Перший, підшипник температура стандарт насос підшипник температура стандартного 1, gb3215-824.4.1 насос працює період, максимально несучих температура не перевищує 80 ℃. 2, підвищення температури підшипник jb/t5294-913.2.9.2 не може перевищувати...