Denison D03 A3001 35 151 01 01 00B5 01551 Hydraulic Directional Control Valve

Hydraulic Pumps Denison D03 A3001 35 151 01 01 00B5 01551 Hydraulic Directional Control Valve
REMANUFACTURED, BENCHMARK AFTERMARKET AND REPAIRS
We stock remanufactured and new aftermarket Denison hydraulic valves. Many units are in stock and available for immediate delivery. All units are fully tested and set to OEM specifications before leaving any of our facilities and are backed by an industry leading warranty.
Units we commonly stock in reman or aftermarket are:
R4, R5
2F1C
Over 10,000 valves in stock Extensive line of Benchmark valves with deep discounts
Two dedicated valve test stands
Valves tested for internal and external leakage, proper pilot pressure, flow capacity, proper spool movement, and overall performance
Comprehensive warranty on all valves
Final test reports available upon request
Expert, trained technicians
Quick turnaround on repair of remanufactured valves
Comprehensive 18 month warranty
GET IN TOUCH
Want a FREE quote for repair? Looking for a particular part? Searching for a specific pump, motor or valve? Or do you just have a question or comment? If so, give us a call, email us or complete the contact form below (all fields are required), and the appropriate team member will contact you.
DESCRIPTION: For sale in good used condition is a Denison Hydraulic Directional Control Valve, item weights 10 pounds in a box.

SPECIFICATIONS:

Part # A3001 35 151 01 01 00B5 01551

Hydraulic Directional Control Valve- Electric
Size: D03
Voltage: 120 60HZ
PSI: 3000
Flow: 10
Direction 2 Post 4 Way
Spring: Offset
14 day warranty

Denison D03 A3001 35 151 01 01 00B5 01551 Hydraulic Directional Control Valve
The ability to achieve high working pressure in a compact form factor ensures a higher power-to-weight ratio and lower installation costs.
The inherent low noise characteristics of the mother blade mechanism improve the operator's comfort.
12 blade system to ensure that the flow pulse amplitude is small, the system noise characteristics of low.
Designed to prevent internal wear of the shaft and the bearing's radial load hydraulic balance ensures long life.
By eliminating the biaxial extension of the motor or by reducing the motor and
The number of drive couplings, double pump and via shaft drive configurations to save installation location and cost.
Through-axis drive type provides valuable loop design flexibility, such as on a single input driver to achieve quantitative and variable type.
16 kinds of flow displacement and the ability to achieve high working pressure for your flow and pressure requirements of the entire range to provide the best choice and a single supply capacity.
The factory-tested movement kit provides the performance of the new pump after installation.
Movement kit structure to ensure rapid and efficient on-site maintenance. The movement is separated from the drive shaft, and it is easy to change the flow capacity and proceed without folding the pump from its stand
The inlet and outlet ports can be oriented to four different relative positions, providing great installation flexibility and ease of machine design. The blade pump is a pump in which the blades in the rotor groove are in contact with the pump casing (stator ring), and the sucked liquid is pressed from the oil inlet side to the oil discharge side.
PV29 1L1D C00 T6CM-B05-3R00-C1 M4SD 128 3N00 B502 M4SD 055 3N00 A502
Double pump
T6DCM-B45-B05-3L00-C1
T6TDB-014-B05-1R00-C100
T6DC-045-022-3R00B1
T6EDM-066-B42-3L00-C1
T6CCM-B22-B22-3R00-C1
T6CC-025-006-5R00-C100
T6CCM-B05-B05-1L00-D100
MODEL T6CC-025 008 1R00 C100
T6DCM-B45-022-3R00
Double blade pump
T6DCM B35 B22 3R1101
T6EDM-052-045-1R03-B1-J224J34
T6DCM-B42-B06-3R13C101
T6DC-050-022-1R00-C111
Blade pump
T6ED-052-048-1R03-B1-J224
T6DCM-B50-B31-3R00-C1
T6E 066 1L02A T6D-050-2R02-B1
Hydraulic pump T6EC-062-025-3R13-BIMZ TCC-010
Plunger pump T6E-0521R03A1